The ABCs of Painting Fascia Boards

Painting fascia boards doesn’t have to be hard. Here are some tips to make it a lot easier for you.

Installing fascia boards is one thing; painting them is another. Indeed, the latter can still be a great challenge, since it’s all about giving your fascia boards the kind of finish that they deserve. Besides, if you don’t do it right, then you could actually be damaging what could have been an enhanced appearance of your home.

The Struggling Painter and Fascia Boards

As much as possible, you want to apply clear, clean, and even paint to your fascia boards; and you don’t need to be a professional to accomplish this. Here are some tips for you to get rid of the struggle:

1. Check first the current fascia board. If you have an existing fascia board, it’s important that you can check the condition first before you actually start painting it. If it’s damaged—such as it’s already rotten, discoloured, or almost falling off—you may want to fix the board or even change it. Painting damaged fascia boards will just be a futile attempt. Sooner or later they will fall off, and you have to spend again for their repair.

2. Select two colours of different shades for your fascia board. Actually, you can always go for one, but if you want to give your fascia board life—and just to make sure that it doesn’t appear separated from the overall look of your home—choose two hues. The first one should be a colour that will complement the paint of your home. The other must be the same as the colour of your trim. You may also opt to pain both the rain gutter the same colour as your fascia board.

3. Choose the right brush that you’re going to use to pain the board. The brush that you are going to use must be in relation to the size of your fascia boards. For example, if your fascia board is wide, a trim roller that is 3 to 4 inches in thickness will do. The flat areas can be covered with paint through the use of a brush and a roller. The angled sash brush is perfect for a fascia board that is 4 to 6 inches thick.

4. Allow the primer to stay for at least a day. You basically don’t apply one coat of paint to your fascia boards, and you’re done. There are two or three coats of them, and the first one is called the primer. The latter must stay on the fascia board for at least a day. This way, it will be given enough time to dry, before you apply the next coat. The purpose of the primer is to allow the paint to stick to the fascia board as well as to add protection to the wood. However, if you’re using primed fascia board, you can directly apply the second coat.

5. Repaint at least every 5 years. There are some fascia boards, such as those made of PVC, that don’t need to be repainted. However, if you’re using the standard ones, you may have to repaint these fascia boards at least every 5 years, so they would tend to last longer.

Article Source: http://www.where-to-find.net

For easy painting, look for primed or PVC-type fascia boards. All these and more can be found at Euro Trims.